Magnetic Separator
They are all new and efficient wet magnetic separator equipment
Tag:
Classification:
Product Details
Product Advantages
1. They are all new and efficient wet magnetic separator equipment;
2. The magnetic system all uses neodymium iron boron magnets with high magnetic energy product and high coercivity. The magnetic field intensity is high and the depth of action is large. The magnetic field strength demagnetization rate does not exceed 5% in 8 years;
3. The large envelope angle magnetic system with gradient field intensity and smooth transition increases the length of the sorting belt and the number of magnetic flips to achieve efficient separation of magnetic minerals and non-(weak) magnetic minerals;
4. The magnetic system is covered with non-magnetic stainless steel to ensure that the magnet does not fall off;
5. According to different uses and sorting conditions, each series of magnetic separators have different magnetic system designs and tank structures;
6. The tank structure is semi-countercurrent type. It can also be made into a downstream tank according to the sorting conditions and user requirements;
7. The cylinder is made of non-magnetic stainless steel and covered with wear-resistant rubber, which significantly improves the service life of the cylinder;
8. The permanent magnet drum has strong adaptability to production and can withstand large fluctuations in ore feeding volume, ore feeding particle size and slurry concentration;
9. Superior mineral processing indicators of high grade and high recovery rate can be obtained at the same time;
10. Each series of magnetic separators can be used together, or one series can be used alone, and excellent mineral processing indicators can be obtained;
11. Reasonable design, reliable operation and easy maintenance.
Working Principle
Permanent magnet drum type magnetic separators can be divided into three types: cocurrent flow type, counterflow type and semi-counterflow type according to their different box bottom structures.
Downstream permanent magnet drum magnetic separator: The feeding direction of the slurry is the same as the direction of the drum, the concentrate is discharged on the other side, and the tailings are discharged directly at the bottom. It is generally used for coarsening, concentrating, and recycling of 6 to 0mm strong magnetic minerals. The efficiency is low and the grade is high (due to the strong magnetic turning effect), but it is not suitable for processing fine particles (because the relative movement speed between the barrel and the pulp is low and the cleaning effect is poor) Counterflow permanent magnet drum magnetic separator: the feeding direction of the pulp is opposite to the direction of the drum , the concentrate is discharged on one side of the ore feeder, and the tailings are discharged on the other side. It is generally used for coarse and sweeping separation of 0.6-0mm strong magnetic ores, with high recovery rate (because the tailings discharge point is far from the ore feed port, sufficient separation) but low grade (due to poor magnetic turning effect).
Semi-countercurrent permanent magnet drum: The feeding direction of the slurry is half the same as the direction of the drum and half opposite. The difference from the downstream type is that the slurry turns in a circle in the tank. Because the slurry is flushed into a loose state by the dispersing water, inclusions can be prevented, and the movement direction of the slurry is consistent with the direction of the magnetic force, which is conducive to recovery. Because the 0.5-0mm strong magnetic ore is coarse, refined, and swept, the recovery rate and grade are high, and the slurry surface is stable. Therefore, the selection is stable. Therefore, it is widely used.
Related&Recommend
Message feedback
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!