MER Group: Rotary Kiln Working Basics


A lime rotary kiln features a long, slightly inclined cylindrical shell as its main structural body. Constructed from premium steel materials, the cylinder is internally fitted with high-temperature refractory linings and stably supported by a set of riding wheel units. Powered by the driving mechanism, the kiln performs steady low-speed rotation, with operational speeds typically maintained between 1 and 4 revolutions per minute. The entire kiln system is integrated with supporting equipment such as preheaters, coolers, combustion burners and dust removal systems, establishing a fully automated and continuous calcination production process.
The equipment operates based on the core principles of countercurrent heat transfer and gradient thermal calcination, with the entire working procedure divided into three major phases:
Feeding and Preheating Phase
Limestone raw materials are delivered into the preheater through the feeding system. Driven by gravitational force and the kiln’s rotational motion, materials gradually advance toward the lower kiln head. At the same time, fuels including pulverized coal and natural gas are sprayed and ignited at the kiln head, producing high-temperature flue gas that flows axially toward the kiln tail. During reverse contact with the moving materials, preliminary heat transfer takes place, which removes internal moisture and preconditions limestone for subsequent thermal decomposition.
Calcination and Decomposition Phase
As materials enter the central high-temperature zone of the kiln, where the temperature reaches 1200–1400°C, continuous rolling and stirring enables sufficient contact with high-temperature flue gas. In this environment, calcium carbonate (CaCO₃) undergoes thorough thermal decomposition, generating quicklime (CaO) and carbon dioxide (CO₂). The consistent tumbling motion ensures even heating across all materials, effectively eliminating local under-calcination or over-calcination problems — this mechanism guarantees the stable and uniform quality of finished lime products.
Cooling and Discharging Phase
After full calcination, the finished quicklime moves forward into the supporting cooler for forced air cooling. Cold air blown into the cooler absorbs residual heat from high-temperature lime and converts into hot air, which is partially recycled to the kiln head as auxiliary combustion air for waste heat recovery and energy saving. The residual flue gas discharged from the kiln tail is treated through professional dust removal, desulfurization and denitrification processes before being released in compliance with environmental emission standards.